###########################################################
# RELEASE NOTES FOR CLICKSHARE CLASSIC BASE UNIT FIRMWARE #
###########################################################



Public Release
==============


Release Version: 01_09_05_0002
==============================

--------------------------------------------------------------------------------

Improvements/bug fixes
----------------------
	* Several bugfixes.

Remarks
-------
	* Only active DP to HDMI convertors can be used to support 4K on HDMI
	  inputs.

Known issues
------------
	* The Base Unit doesn't wake up from standby when a display is plugged
	  in.
	* When doing Airplay video streaming, a lag can build up.
	* When using the https wizard, it is advised to reboot if a mistake was
	  made (e.g. wrong password entered once, or wrong certificate chosen)
	  and redo do all actions over again.
	* When changing Base unit Wi-Fi IP, there is no message telling to re-
	  pair the Button.
	* The Base Unit cannot communicate with a Polycom device if that device
	  has a telnet password set.
	* Sometimes the Button update via USB doesn't start. If this happens,
	  unplug the Button and try again.
	* While switching from https to http, the web interface/RESTAPI doesn't
	  get redirected.
	* The screen saver isn't activated any more after pairing a Button.
	  Rebooting the Base Unit after pairing a Button is advised.
	* On Safari browsers https can only be enabled by generating the self-
	  signed certificates and not by uploading the certificates.